We are leading Inconel 600 Tube Fittings manufacturer in India
Buy Inconel 600 Double Ferrule Tube Fittings at reasonable rates from the stockholder.
Table of content
- Inconel Tube Fittings Specification
- Types of Inconel 600 Tube Fittings
- Inconel 600 Compression Fittings chemical composition
- Inconel 600 UNS N06600 Air Fittings mechanical composition
- Inconel UNS No 6600 Compression Fittings equivalent grade
- Size chart of Alloy Inconel 600 Bulkhead Tube Fittings
- Inconel Alloy 600 Imperial Fittings Pressure rating
- Inconel 600 Instrumentation Fittings Price list
- Heat Treatment for UNS N06600 Single Ferrule Fittings
- Nickel 600 Reducing Union Dimensions
- WNR 2.4816 Flare Fittings operating temperature
- Melting Point of Inconel 600 Twin Ferrule Fittings
| Standards | ASTM B564 / ASME SB564 |
|---|---|
| Types |
|
| Sizes | 1/8″ to 2″ and 3mm to 50mm |
| Ends |
|
| Pressure Rating |
|
| Threads |
|
| Test & Certification |
|
Inconel 600 Compression Fittings
Alloy 600 Imperial Fittings
6000PSI Inconel Compression Tube
Nickel 600 Ferrule Tube Fittings
UNS N06600 Single Ferrule Fittings
Din 2.4816 Double Ferrule Tube Fittings
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
|---|---|---|---|---|---|---|---|---|---|
| 600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
| max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – | |
Whether you require UNS N06600 Bulkhead Tube Fittings for instrumentation or industrial purposes, we have you covered.
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min |
|---|---|---|---|
| 600 | 655 MPa | 310 MPa | 40 |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
|---|---|---|---|---|---|---|---|
| BS | En | No | AFNOR | ||||
| Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
Discover the electrical resistivity and impact strength properties of our Nickel 600 Imperial Fittings for efficient usage.
| Tube OD (in) | Thread Size (in) | Hex Flat (in) |
|---|---|---|
| 1/16 | 1/16 | 0.31 |
| 1/8 | 1/8 | 0.38 |
| 3/16 | 1/8 | 0.38 |
| 1/4 | 1/4 | 0.46 |
| 5/16 | 1/4 | 0.46 |
| 3/8 | 3/8 | 0.54 |
| 1/2 | 1/2 | 0.71 |
| 5/8 | 1/2 | 0.71 |
| 3/4 | 3/4 | 0.83 |
| 7/8 | 3/4 | 0.83 |
| 1 | 1 | 1.02 |
| NPT/ISO Pipe Size in. | Male | Female |
|---|---|---|
| psig (bar) | psig (bar) | |
| 1/16 | 15000 (1 033) | 12900 (888) |
| 1/8 | 15000 (1 033) | 12500 (861) |
| 1/4 | 15000 (1 033) | 12700 (875) |
| 3/8 | 15000 (1 033) | 10200 (702) |
| 1/2 | 14800 (1 019) | 9400 (647) |
| 3/4 | 10000 (689) | 8900 (613) |
| 1 | 10000 (689) | 8500 (585) |
| 1 1/4 | 10000 (689) | 9600 (661) |
| 1 1/2 | 9600 (661) | 8900 (613) |
| 2 | 7500 (516) | 7500 (516) |
Efficient exporter of 6000PSI Alloy Compression Tube fittings with simplified installation and cost savings
| Product | Price in USD | Price in Dirham | Price in Euro |
|---|---|---|---|
| Alloy 600 NPT 3/4″ Male x Male 90 Deg Elbow | 12.89 | 11.19 | 47.34 |
| 1/8″ NPT Inconel 600 Male Equal Tee | 9.48 | 8.23 | 34.82 |
| Solution Annealing | At 925–980 °C |
|---|---|
| Precipitation Hardening | At 720 °C |
| TUBE T1 |
O.D. T2 |
A | E | D2 | D1 | F | G1 | G2 | H |
|---|---|---|---|---|---|---|---|---|---|
| 1/16 | 1/8 | 31.0 | 1 | 12.7 | 8.6 | 12 | 12 | 10 | 20.6 |
| 1/8 | 3/16 | 36.6 | 3 | 13.7 | 12.7 | 12 | 12 | 12 | 23.4 |
| 1/8 | 1/4 | 38.6 | 3 | 15.2 | 12.7 | 14 | 14 | 14 | 24.6 |
| 1/4 | 5/16 | 42.2 | 5 | 16.2 | 15.2 | 14 | 14 | 17 | 27.4 |
| 1/4 | 3/8 | 43.2 | 5 | 16.8 | 15.2 | 17 | 14 | 17 | 28.4 |
| 1/4 | 1/2 | 47.0 | 5 | 22.8 | 15.2 | 22 | 17 | 22 | 29.5 |
| 3/8 | 1/2 | 48.5 | 7 | 22.8 | 16.8 | 22 | 17 | 22 | 31.0 |
| 1/2 | 3/4 | 53.6 | 10 | 24.4 | 22.8 | 27 | 19 | 30 | 33.3 |
| 3/4 | 1 | 62.7 | 15 | 31.2 | 24.4 | 35 | 22 | 38 | 40.4 |
| Operating temperature | -200 to +1000 °C |
|---|
| Melting Point | 1413 °C |
|---|